Replacing the battery in a Subaru key fob is a simple task that can be completed in a few minutes. A key fob is a small, wireless device that allows you to lock and unlock your car, as well as open the trunk and panic alarm. It is powered by a small battery that needs to be replaced every few years.
There are a few reasons why you might need to change the battery in your Subaru key fob. One reason is if the fob is not working properly. If you are having trouble locking or unlocking your car, or if the panic alarm is not working, it may be time to replace the battery. Another reason to replace the battery is if the fob is starting to show signs of wear and tear. If the fob is cracked or damaged, it may be more susceptible to water damage or other problems. Replacing the battery is a simple way to keep your key fob working properly and looking its best.
To change the battery in your Subaru key fob, you will need a new battery and a small screwdriver. The type of battery you need will depend on the model of your Subaru. You can find the correct battery type in your owner’s manual. Once you have the battery, follow these steps:
- Locate the small screw on the back of the key fob. Use the screwdriver to remove the screw.
- Gently pry open the back of the key fob. Be careful not to damage the fob.
- Locate the battery and remove it. Insert the new battery into the fob, making sure that the positive and negative terminals are aligned correctly.
- Snap the back of the key fob back into place. Tighten the screw to secure the back of the fob.
- Test the key fob to make sure it is working properly.
Changing the battery in your Subaru key fob is a simple task that can be completed in a few minutes. By following these steps, you can keep your key fob working properly and looking its best.
1. Battery type
The type of battery you need for your Subaru key fob is important because using the wrong type of battery can damage the fob or prevent it from working properly. Different Subaru models use different types of batteries, so it is important to consult your owner’s manual to find the correct type of battery for your vehicle.
Using the wrong type of battery can cause a number of problems, including:
- The key fob may not work properly.
- The key fob may be damaged.
- The battery may leak, which can damage the key fob or other components in your vehicle.
It is important to note that the battery in your Subaru key fob will eventually need to be replaced. The lifespan of a key fob battery will vary depending on how often the fob is used, but most batteries will last for several years.
When it is time to replace the battery in your Subaru key fob, it is important to use the correct type of battery and to follow the instructions in your owner’s manual. Replacing the battery in your key fob is a simple task that can be completed in a few minutes.
2. Tools
This statement is an important part of understanding how to change the battery in a Subaru key fob. The key fob is a small, wireless device that allows you to lock and unlock your car, as well as open the trunk and panic alarm. It is powered by a small battery that needs to be replaced every few years.
-
The type of screwdriver you need
The type of screwdriver you need will depend on the model of your Subaru. You can find the correct type of screwdriver in your owner’s manual. -
Where to find the screw
The screw that holds the back of the key fob in place is usually located on the back of the fob. It is a small, Phillips head screw. -
How to remove the screw
To remove the screw, simply insert the screwdriver into the screw and turn it counterclockwise. Be careful not to overtighten the screw when you put it back in. -
What to do if you don’t have a screwdriver
If you don’t have a screwdriver, you can try using a small coin or a butter knife to remove the screw. However, be careful not to damage the screw or the key fob.
Once you have removed the screw, you can gently pry open the back of the key fob. Be careful not to damage the fob. Once the back of the fob is open, you can replace the battery. Make sure that the positive and negative terminals of the battery are aligned correctly. Once you have replaced the battery, snap the back of the key fob back into place and tighten the screw.
3. Steps
These steps are an essential part of changing the battery in a Subaru key fob. The key fob is a small, wireless device that allows you to lock and unlock your car, as well as open the trunk and panic alarm. It is powered by a small battery that needs to be replaced every few years. If the battery in your key fob is dead, you will not be able to use it to lock or unlock your car. Replacing the battery is a simple process that can be completed in a few minutes.
- Identify the correct screw: The screw that holds the back of the key fob in place is usually located on the back of the fob. It is a small, Phillips head screw.
- Remove the screw: To remove the screw, simply insert the screwdriver into the screw and turn it counterclockwise. Be careful not to overtighten the screw when you put it back in.
Once you have removed the screw, you can gently pry open the back of the key fob. Be careful not to damage the fob. Once the back of the fob is open, you can replace the battery. Make sure that the positive and negative terminals of the battery are aligned correctly. Once you have replaced the battery, snap the back of the key fob back into place and tighten the screw.
4. Gently pry open the back of the key fob. Be careful not to damage the fob.
This step is crucial in the process of changing the battery in a Subaru key fob. The key fob is a small, wireless device that allows you to lock and unlock your car, as well as open the trunk and panic alarm. It is powered by a small battery that needs to be replaced every few years. If the battery in your key fob is dead, you will not be able to use it to lock or unlock your car. Replacing the battery is a simple process that can be completed in a few minutes, but it is important to be careful not to damage the fob when prying it open.
- Use the correct tools: The best way to pry open the back of the key fob without damaging it is to use a small, flat-head screwdriver. Insert the screwdriver into the small notch on the back of the fob and gently pry it open. Be careful not to use too much force, as you could damage the fob.
- Be patient: It may take a few tries to get the back of the fob open. Be patient and don’t force it. If you are having trouble, try using a different tool, such as a butter knife or a small coin.
- Be careful not to damage the battery: Once you have the back of the fob open, be careful not to damage the battery. The battery is a small, coin-shaped object that is located in the center of the fob. Use your fingers or a pair of tweezers to remove the battery from the fob.
Once you have removed the old battery, insert the new battery into the fob. Make sure that the positive and negative terminals of the battery are aligned correctly. Then, snap the back of the fob back into place and tighten the screw.
5. Locate the battery and remove it. Insert the new battery into the fob, making sure that the positive and negative terminals are aligned correctly.
Replacing the battery in a Subaru key fob is a simple task, but it is important to do it correctly to avoid damaging the fob or the battery. The following steps will guide you through the process of locating and replacing the battery in your Subaru key fob.
-
Step 1: Locate the battery
The battery is usually located in the center of the key fob. It is a small, coin-shaped object. To remove the battery, use a small screwdriver or a butter knife to gently pry it out of the fob. -
Step 2: Insert the new battery
Once you have removed the old battery, insert the new battery into the fob. Make sure that the positive and negative terminals of the battery are aligned correctly. The positive terminal is usually marked with a “+” sign, and the negative terminal is usually marked with a “-” sign. -
Step 3: Replace the back of the fob
Once you have inserted the new battery, replace the back of the fob. Make sure that the back is securely snapped into place.
Your Subaru key fob is now ready to use.
FAQs on How to Change Battery in Subaru Key Fob
Replacing the battery in a Subaru key fob is a simple task, but there are a few common questions that people have. Here are the answers to some of the most frequently asked questions:
Question 1: What type of battery does my Subaru key fob use?
The type of battery that your Subaru key fob uses will depend on the model of your vehicle. You can find the correct battery type in your owner’s manual.
Question 2: How often should I change the battery in my Subaru key fob?
The battery in your Subaru key fob should be changed every few years, or more often if you use your key fob frequently.
Question 3: Can I change the battery in my Subaru key fob myself?
Yes, you can change the battery in your Subaru key fob yourself. The process is simple and only takes a few minutes.
Question 4: What are the steps for changing the battery in my Subaru key fob?
The steps for changing the battery in your Subaru key fob are as follows:
1. Locate the small screw on the back of the key fob. Use a small screwdriver to remove the screw.
2. Gently pry open the back of the key fob. Be careful not to damage the fob.
3. Locate the battery and remove it. Insert the new battery into the fob, making sure that the positive and negative terminals are aligned correctly.
4. Snap the back of the key fob back into place. Tighten the screw to secure the back of the fob.
Question 5: What should I do if my Subaru key fob still doesn’t work after I change the battery?
If your Subaru key fob still doesn’t work after you change the battery, there may be another issue with the fob. You can try cleaning the battery contacts with a cotton swab dipped in rubbing alcohol. If that doesn’t work, you may need to take the fob to a dealer or automotive locksmith to have it repaired or replaced.
Summary: Changing the battery in a Subaru key fob is a simple task that can be completed in a few minutes. By following the steps outlined in this FAQ, you can easily replace the battery in your key fob and keep it working properly.
Transition to the next article section: If you are having trouble changing the battery in your Subaru key fob, you can always consult your owner’s manual or take the fob to a dealer or automotive locksmith for assistance.
Tips for Changing the Battery in a Subaru Key Fob
Replacing the battery in a Subaru key fob is a simple task, but there are a few tips that can make the process easier and more efficient.
Tip 1: Use the correct battery. The type of battery that your Subaru key fob uses will depend on the model of your vehicle. You can find the correct battery type in your owner’s manual.
Tip 2: Have the right tools. You will need a small screwdriver to remove the screw on the back of the key fob. You may also need a small, flat-head screwdriver or a butter knife to pry open the back of the fob.
Tip 3: Be careful not to damage the key fob. When prying open the back of the fob, be careful not to damage the fob or the battery. Use a small, flat-head screwdriver or a butter knife to gently pry open the back of the fob.
Tip 4: Align the battery correctly. When inserting the new battery, make sure that the positive and negative terminals are aligned correctly. The positive terminal is usually marked with a “+” sign, and the negative terminal is usually marked with a “-” sign.
Tip 5: Test the key fob. Once you have replaced the battery, test the key fob to make sure that it is working properly.
Summary: By following these tips, you can easily change the battery in your Subaru key fob and keep it working properly.
Transition to the article’s conclusion: If you are having trouble changing the battery in your Subaru key fob, you can always consult your owner’s manual or take the fob to a dealer or automotive locksmith for assistance.
Conclusion
Replacing the battery in a Subaru key fob is a simple task that can be completed in a few minutes. By following the steps outlined in this article, you can easily change the battery in your key fob and keep it working properly.
Here are some key points to remember when changing the battery in your Subaru key fob:
- Use the correct battery type.
- Have the right tools.
- Be careful not to damage the key fob.
- Align the battery correctly.
- Test the key fob.
If you are having trouble changing the battery in your Subaru key fob, you can always consult your owner’s manual or take the fob to a dealer or automotive locksmith for assistance.
