Changing the water filter in your Whirlpool side-by-side refrigerator is an important task that helps ensure your family has access to clean, healthy drinking water. It’s a simple process that can be completed in just a few minutes.
Here are the steps on how to change the water filter in your Whirlpool side-by-side refrigerator:
- Locate the water filter. It is usually located in the upper right-hand corner of the refrigerator, behind the top shelf.
- Remove the old water filter by turning it counterclockwise and pulling it straight down.
- Insert the new water filter into the housing and turn it clockwise until it is snug.
- Reset the water filter indicator light by pressing the “Filter Reset” button on the control panel.
That’s all there is to it! Changing the water filter in your Whirlpool side-by-side refrigerator is a quick and easy task that can help ensure your family has access to clean, healthy drinking water.
1. Locate
Locating the water filter is the first step in changing the water filter in your Whirlpool side-by-side refrigerator. The water filter is usually located in the upper right-hand corner of the refrigerator, behind the top shelf. Once you have located the water filter, you can remove the old filter and insert the new filter.
- Identifying the Water Filter Housing: The water filter housing is typically a white or blue plastic cylinder with a twist-off cap. It is usually located in the upper right-hand corner of the refrigerator, behind the top shelf. Some models may have the water filter housing located in the bottom grille of the refrigerator.
- Checking the Refrigerator Manual: If you are having trouble locating the water filter, consult your refrigerator’s user manual. The manual will provide you with specific instructions on how to locate and change the water filter.
- Using a Flashlight: If the water filter is located in a dark area, use a flashlight to help you see.
- Unplugging the Refrigerator: Before you begin working on the water filter, unplug the refrigerator from the power outlet. This will help to prevent accidental electrical shock.
Once you have located the water filter, you can proceed to the next step, which is removing the old filter.
2. Remove
Removing the old water filter is the second step in changing the water filter in your Whirlpool side-by-side refrigerator. Once you have located the water filter, you can remove the old filter by turning it counterclockwise and pulling it straight down.
- Twist and Pull: To remove the old water filter, simply twist it counterclockwise and pull it straight down. Do not twist the filter clockwise, as this could damage the filter housing.
- Use a Filter Wrench: If you are having trouble removing the old water filter by hand, you can use a filter wrench. Filter wrenches are available at most hardware stores.
- Check for Leaks: Once you have removed the old water filter, check the filter housing for any leaks. If you see any leaks, tighten the new filter until the leaks stop.
- Dispose of the Old Filter: Once you have removed the old water filter, dispose of it according to your local regulations.
After you have removed the old water filter, you can proceed to the next step, which is inserting the new filter.
3. Insert
Inserting the new water filter is the third step in changing the water filter in your Whirlpool side-by-side refrigerator. Once you have removed the old filter, you can insert the new filter by pushing it straight up into the filter housing and turning it clockwise until it is snug.
- Align the Filter: Before inserting the new water filter, make sure that the filter is aligned correctly. The filter should be inserted with the arrow pointing towards the top of the filter housing.
- Push and Twist: To insert the new water filter, simply push it straight up into the filter housing and turn it clockwise until it is snug. Do not overtighten the filter, as this could damage the filter housing.
- Check for Leaks: Once you have inserted the new water filter, check the filter housing for any leaks. If you see any leaks, tighten the filter until the leaks stop.
- Reset the Filter Indicator Light: Once you have inserted the new water filter, reset the filter indicator light by pressing the “Filter Reset” button on the control panel.
After you have inserted the new water filter, you can proceed to the next step, which is resetting the filter indicator light.
4. Reset
Resetting the filter indicator light is an important part of changing the water filter in your Whirlpool side-by-side refrigerator. The filter indicator light lets you know when it’s time to change the water filter. If you don’t reset the filter indicator light, it will continue to flash even after you’ve changed the water filter.
To reset the filter indicator light, simply press the “Filter Reset” button on the control panel. The filter indicator light will then turn off.
Resetting the filter indicator light is a simple task that takes only a few seconds. However, it’s an important step that ensures that you’re always aware of when it’s time to change the water filter. By resetting the filter indicator light, you can help ensure that your family has access to clean, healthy drinking water.
5. Replace
Replacing the water filter in your Whirlpool side-by-side refrigerator is an important part of maintaining your refrigerator and ensuring that your family has access to clean, healthy drinking water. The water filter removes impurities from the water, such as chlorine, lead, and bacteria. Over time, the water filter can become clogged with impurities, which can reduce the flow of water to your refrigerator and dispenser. Replacing the water filter regularly will help to ensure that your refrigerator is operating at peak efficiency and that your family has access to clean, healthy drinking water.
- Frequency of Replacement: The frequency with which you need to replace the water filter in your Whirlpool side-by-side refrigerator will depend on a number of factors, including the quality of your water and how often you use your refrigerator. However, most manufacturers recommend replacing the water filter every six months.
- Signs that the Water Filter Needs to be Replaced: There are a few signs that may indicate that the water filter in your Whirlpool side-by-side refrigerator needs to be replaced. These signs include a decrease in the flow of water from the refrigerator or dispenser, a change in the taste or smell of the water, or the presence of sediment in the water.
- Benefits of Replacing the Water Filter: Replacing the water filter in your Whirlpool side-by-side refrigerator has a number of benefits, including improved water quality, better tasting water, and reduced risk of contamination. Replacing the water filter can also help to extend the life of your refrigerator.
- Cost of Replacing the Water Filter: The cost of replacing the water filter in your Whirlpool side-by-side refrigerator will vary depending on the model of your refrigerator and the type of water filter that you purchase. However, most water filters cost between $20 and $50.
Replacing the water filter in your Whirlpool side-by-side refrigerator is a simple task that can be completed in a few minutes. By following the steps outlined in this article, you can help to ensure that your refrigerator is operating at peak efficiency and that your family has access to clean, healthy drinking water.
FAQs on How to Change Water Filter in Whirlpool Side-by-Side Refrigerator
Changing the water filter in your Whirlpool side-by-side refrigerator is a simple task that can be completed in a few minutes with the right preparation. Here are some frequently asked questions complete with brief answers to help guide you through the process and address any concerns you may have:
Question 1: How often should I change the water filter in my Whirlpool side-by-side refrigerator?
For optimal performance, it’s recommended to replace the water filter every six months, or more frequently if you notice a decrease in water flow or a change in taste or smell.
Question 2: Where is the water filter located in my Whirlpool side-by-side refrigerator?
The water filter is typically located in the upper right-hand corner of the refrigerator, behind the top shelf.
Question 3: Do I need to turn off the water supply before changing the water filter?
No, it’s not necessary to turn off the water supply before changing the water filter.
Question 4: How do I remove the old water filter?
To remove the old water filter, simply grasp it and turn it counterclockwise. It should come out easily.
Question 5: How do I insert the new water filter?
To insert the new water filter, simply align the filter with the housing and push it in until it clicks into place. Then, turn it clockwise to tighten it.
Question 6: How do I reset the water filter indicator light?
Once you have replaced the water filter, reset the water filter indicator light by pressing the “Filter Reset” button on the control panel.
Changing the water filter in your Whirlpool side-by-side refrigerator is a simple and important task that helps ensure your family has access to clean, healthy drinking water.
Summary of key takeaways:
- Change the water filter every six months for optimal performance.
- Locate the water filter in the upper right-hand corner of the refrigerator, behind the top shelf.
- No need to turn off the water supply before changing the water filter.
- To remove the old water filter, grasp it and turn it counterclockwise.
- To insert the new water filter, align it with the housing, push it in, and turn it clockwise to tighten.
- Reset the water filter indicator light by pressing the “Filter Reset” button on the control panel.
Transition to the next article section:
For more information on how to change the water filter in your Whirlpool side-by-side refrigerator, please consult the user manual or contact Whirlpool customer support.
Tips to Change Water Filter in Whirlpool Side-by-Side Refrigerator
Changing the water filter in your Whirlpool side-by-side refrigerator is a simple task that can be completed in a few minutes with the right preparation. Here are some tips to help you get the job done quickly and efficiently:
Tip 1: Locate the water filter. The water filter is typically located in the upper right-hand corner of the refrigerator, behind the top shelf.
Tip 2: Turn off the water supply. While not necessary, turning off the water supply to your refrigerator will help prevent any leaks or spills while you are changing the filter.
Tip 3: Remove the old water filter. To remove the old water filter, simply grasp it and turn it counterclockwise. It should come out easily.
Tip 4: Insert the new water filter. To insert the new water filter, simply align the filter with the housing and push it in until it clicks into place. Then, turn it clockwise to tighten it.
Tip 5: Reset the water filter indicator light. Once you have replaced the water filter, reset the water filter indicator light by pressing the “Filter Reset” button on the control panel.
By following these tips, you can easily change the water filter in your Whirlpool side-by-side refrigerator and ensure that your family has access to clean, healthy drinking water.
For more information on how to change the water filter in your Whirlpool side-by-side refrigerator, please consult the user manual or contact Whirlpool customer support.
Conclusion
Changing the water filter in your Whirlpool side-by-side refrigerator is a simple and important task that helps ensure your family has access to clean, healthy drinking water. By following the steps outlined in this article, you can easily complete this task in a few minutes.
Remember to change your water filter every six months, or more frequently if you notice a decrease in water flow or a change in taste or smell. By doing so, you can help ensure that your refrigerator is operating at peak efficiency and that your family has access to clean, healthy drinking water.
