Removing SharkBite fittings is relatively easy and can be done with a few simple tools.SharkBite fittings are a type of push-to-connect fitting that is used to connect copper, CPVC, or PEX pipe. They are easy to install and do not require any special tools or skills. However, if you need to remove a SharkBite fitting, it is important to do so carefully to avoid damaging the pipe.To remove a SharkBite fitting, you will need a pair of pliers and a flat-head screwdriver.1. Turn off the water supply. This is important to do before you start working on the fitting, as it will prevent water from leaking out when you remove it.2. Use the pliers to squeeze the release collar on the fitting. This will release the fitting from the pipe.3. Gently pull the fitting away from the pipe. If the fitting is stuck, you can use the flat-head screwdriver to pry it loose.4. Inspect the pipe for any damage. If the pipe is damaged, you will need to repair it before you can install a new fitting.Once you have removed the SharkBite fitting, you can install a new one by following the same steps in reverse order.
1. Turn off the water supply
Turning off the water supply is a crucial step when removing SharkBite fittings, as it prevents water from leaking out and causing damage. This is especially important if the fitting is located in a concealed area, such as behind a wall or under a sink.
